Home › Forums › General Reloading Discussion › .357 load
Tagged: .357 loads
- This topic has 5 replies, 2 voices, and was last updated 2 years, 1 month ago by
Marc Hilt.
-
AuthorPosts
-
March 5, 2023 at 8:53 am #480059
Marc Hilt
ParticipantHi, tomorrow I will receive some RMR .357 smiley which as you are a FMJ at 147 gr. I have a jug of enforcer which. I would like to use but there is very little data at that weight, FMJ for such load. I have been able to extrapolate what would be a starting point but thought I would ask here.
Have any members done such? Any information is greatly appreciated.March 5, 2023 at 9:22 am #480061SC
ParticipantAre you asking about 357 Sig or 357 Magnum?
March 5, 2023 at 9:32 am #480063Marc Hilt
ParticipantSorry I should have been more clear. 357 magnum.
Thanks.March 5, 2023 at 9:41 am #480065SC
ParticipantHead over to the Hodgdon reloading data center. I selected 357, then checked the boxes for Ramshot and Enforcer in the selections. I left the bullet selection blank.
They don’t show a 147 grain load with Enforcer but they do show a 140 and 158 grain load.
140 grain- Starting load is 14.4 grains Enforcer, 16.0 Max
I would start a little less, say 14.0 grains and work up from there.
March 5, 2023 at 9:57 am #480067Marc Hilt
ParticipantThanks that was one of my sources for my start point.
March 13, 2023 at 5:08 pm #481570Marc Hilt
ParticipantFinally ready to go. The OAL of both the 140 and 158 is 1..590. I see no reason to not use the same even though different bullets. Wrong?
-
AuthorPosts
- You must be logged in to reply to this topic.