Free U.S. Shipping

135 G Match winner VS 9mm PCC Gun FYI

Home Forums General Reloading Discussion 135 G Match winner VS 9mm PCC Gun FYI

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #529610
    Terry Thompson
    Participant

    I have a JP PCC rifle that I have competed with for years. Yesterday I went to a competition using the Match Winners for the first time, they would not chamber reliably. They work just fine in my Glocks but not in the PCC, (that doesn’t have a feed ramp)
    OAL is 1.100″
    When the gun stopped running I found the round standing up between the bolt face and the chamber every time.

    #529612
    SC
    Participant

    1.100 may be a little short. I run mine at 1.135 but you have to be careful if the throats are tight on your pistols. One thought is that the magazine lips may be losing control of the round before the bullet begins entering the chamber.

    Are you using Glock mags in your PCC?

    #529627
    Terry Thompson
    Participant

    I thought at the time, maybe they were too short also, but talking to another shooter using a similar rifle, his ammo was even shorter. His was 1.072″ and it did have a similar shape but was a blue cone shaped almost the same, flat on top but a little rounded.
    I do use Glock mags 33 rounds, and tried two different ones.
    I just received another batch of 135 Match Winners and will load a small amount longer like you (SC) do and see of they work in both the PCC and G34 !!

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.